Best Fence Contractors in Fresno
A short list of fence builders for Fresno and Clovis, picked for track record and clear written quotes.

How we picked
Active CSLB fencing license
We look up each license on the state board (fence builders usually hold a C-13 Fencing license) before a pick is marked checked.
Local track record
An established presence in or near Fresno and a solid public review history.
Clear written quotes
Itemized quotes that list footage, height, posts and materials, and no pressure tactics.
The shortlist
Five fence builders for Fresno, in no paid order. Wood and wrought iron are the most common jobs on this list, and a couple also do ranch fencing. Each shows its license status: “License checked” only appears after we confirm it on the CSLB site.
★ Featured · Paid placement
This Featured spot is open. Paid placements are always labeled and still go through the license check.
1
Kerb Appeal Fenceworks
License check pending
Wood, vinyl, chain link, iron and ranch fencing, gates and gate operators, for homes, businesses and public agencies.
Google rating 4.9 (192 reviews), checked Nov 16, 2026
2
LW Fences
License check pending
Wood fence installation and repair in Fresno.
Google rating 5.0 (131 reviews), checked Nov 16, 2026
3
Justino Fencing Inc
License check pending
Designs, installs and maintains residential and commercial fencing in Fresno.
Google rating 5.0 (57 reviews), checked Nov 16, 2026
4
Mac Fencing Inc
License #1088207 shown on company site · CSLB check pending
Wood fences, pre-made wrought iron fencing and gates for the Fresno-Clovis area, plus Madera, Sanger, Selma, Kerman and Hanford.
Google rating 4.9 (54 reviews), checked Nov 16, 2026
5
Tony’s Fencing Custom Designs
License #1099202 shown on company site · CSLB check pending
Iron fences, gates and automatic gates, security doors, handrails, balconies and pool fencing, plus ironwork repair.
Google rating 4.5 (45 reviews), checked Nov 16, 2026
Ratings are shown as they appeared on Google on the date listed. Spot something out of date? Contact us and we’ll re-check it.
What a fair fence quote in Fresno includes
| Line item | What to expect | Red flag |
|---|---|---|
| Length, height and gates | Total linear feet, fence height and number and width of gates, written into the quote | One lump sum with no footage or height listed |
| Posts and footings | Post material, spacing and depth, set in concrete | Post depth or concrete not mentioned |
| Materials | Board, panel or wire type and grade named, such as redwood vs. pressure-treated pine, or the vinyl or steel product line | “Wood fence” with no species, grade or hardware listed |
| Tear-out and property line | Removal and haul-away of the old fence, and a note on who confirms the property line | Old fence removal left out, or no mention of where the line is |
| Permit and warranty | Who pulls any needed permit, plus a written workmanship warranty | “You don’t need a permit” without checking, or a verbal warranty only |
Cheapest isn’t cheapest
A bid far below the others often skips something: shallow posts, no concrete, a lower board grade, or haul-away of the old fence. Those show up later as leaning sections or extra charges.
Compare quotes on the same footage, height, material and gate count, not just the total.
5 questions to ask before you hire
- Are you licensed with the CSLB, and what’s your license number?
- How deep will you set the posts, and will they be in concrete?
- Who confirms the property line and requests 811 utility marking before digging?
- Does this job need a permit, and will you pull it?
- What written warranty covers the materials and your workmanship?
Check any license yourself
Look up any California contractor license for free on the CSLB site. Fence contractors usually hold a C-13 Fencing license; some also hold other classifications for gates, iron work or general building.
Fence contractors in other California cities
Fencing in Fresno: FAQ
How much does a new fence cost in Fresno?
The main drivers are length, height, material (wood, iron, vinyl or chain link), gates and gate openers, tear-out, and whether the job is a small yard or acreage. Ranch and livestock fencing is priced differently from a back-yard fence. Compare three itemized quotes for the same scope.
Do fence contractors need a license in Fresno?
Yes, for most jobs. Any fence job worth $1,000 or more in labor and materials must be done by a contractor licensed by the Contractors State License Board (CSLB). Fence builders usually hold a C-13 Fencing license, and you can look any license up for free on the CSLB website.
What fence holds up best in Fresno’s heat?
Strong sun and summer heat dry out and fade wood, so it needs regular staining or sealing. Metal and vinyl hold up with less upkeep, though quality varies by brand. Ask each contractor what finish or warranty comes with the material they quote.
Do I need a permit for a fence in Fresno?
A standard back-yard fence within the height limit often doesn’t need one, but taller fences, front-yard fences above the allowed height and block walls generally do. Check with the City of Fresno Planning and Development Department, or Fresno County if you’re outside city limits; Clovis has its own building department.
