Best Fence Contractors in Encinitas

A short list of fence builders for Encinitas, Cardiff and Olivenhain, picked for review history and clear written quotes.

  • 3 picks
  • License status on every pick
  • Last reviewed: Nov 2026
New redwood privacy fence in a back yard, with fresh concrete at the base of each post

How we picked

Active CSLB fencing license

We look up each license on the state board (fence builders usually hold a C-13 Fencing license) before a pick is marked checked.

Local track record

An office in or near Encinitas and a solid public review history.

Clear written quotes

Itemized quotes that list footage, height, posts and materials, and no pressure tactics.

The shortlist

Three fence builders for Encinitas, in no paid order. Cardiff Fence Co is local; Mitre’s Fence is in San Marcos and names Encinitas as a service area; Tornado Fence is inland and doesn’t list cities, so confirm it takes Encinitas jobs. Each shows its license status: “License checked” only appears after we confirm it on the CSLB site.

This Featured spot is open. Paid placements are always labeled and still go through the license check.

1

Mitre’s Fence Inc.

575 N Twin Oaks Valley Rd Ste F, San Marcos · (760) 497-6888

License check pending

San Marcos fence and gate company doing vinyl, wood, iron and chain-link fences and gate operators, with Encinitas on its service list.

Google rating 4.8 (32 reviews), checked Nov 16, 2026

2

Cardiff Fence Co

2033 San Elijo Ave, Encinitas · (760) 544-0223

License check pending

Local fence contractor listed on San Elijo Avenue in Cardiff; no website, so ask for the license number and a written quote.

Google rating 4.6 (12 reviews), checked Nov 16, 2026

3

Tornado Fence Company San Diego

2270 Meyers Ave Unit # B · (760) 755-9810

License #974886 shown on company site · CSLB check pending

Inland North County fence builder doing wood, privacy and vinyl fences.

Google rating 4.8 (85 reviews), checked Nov 16, 2026

Ratings are shown as they appeared on Google on the date listed. Spot something out of date? Contact us and we’ll re-check it.

What a fair fence quote in Encinitas includes

Line itemWhat to expectRed flag
Length, height and gatesTotal linear feet, fence height and number and width of gates, written into the quoteOne lump sum with no footage or height listed
Posts and footingsPost material, spacing and depth, set in concretePost depth or concrete not mentioned
MaterialsBoard, panel or wire type and grade named, such as redwood vs. pressure-treated pine, or the vinyl or steel product line“Wood fence” with no species, grade or hardware listed
Tear-out and property lineRemoval and haul-away of the old fence, and a note on who confirms the property lineOld fence removal left out, or no mention of where the line is
Permit and warrantyWho pulls any needed permit, plus a written workmanship warranty“You don’t need a permit” without checking, or a verbal warranty only

Cheapest isn’t cheapest

A bid far below the others often skips something: shallow posts, no concrete, a lower board grade, or haul-away of the old fence. Those show up later as leaning sections or extra charges.

Compare quotes on the same footage, height, material and gate count, not just the total.

5 questions to ask before you hire

  1. Are you licensed with the CSLB, and what’s your license number?
  2. How deep will you set the posts, and will they be in concrete?
  3. Who confirms the property line and requests 811 utility marking before digging?
  4. Does this job need a permit, and will you pull it?
  5. What written warranty covers the materials and your workmanship?

Check any license yourself

Look up any California contractor license for free on the CSLB site. Fence contractors usually hold a C-13 Fencing license; some also hold other classifications for gates, iron work or general building.

CSLB license lookup →

Fencing in Encinitas: FAQ

How much does a new fence cost in Encinitas?

Footage, height, material, gate count, removing the old fence and digging conditions set the price. Sloped lots in Olivenhain and hillside streets often need stepped panels or retaining work. Compare three itemized quotes for the same footage, material and gate count.

Do fence contractors need a license in California?

Yes, for most jobs. Any fence job worth $1,000 or more in labor and materials must be done by a contractor licensed by the Contractors State License Board (CSLB). Fence builders usually hold a C-13 Fencing license, and you can look any license up for free on the CSLB website.

Does a fence near the coast need different materials?

Often. Salt air and fog rust plain steel and wear on wood posts faster in Leucadia and Cardiff than inland. Vinyl, coated aluminum and corrosion-resistant hardware are common near the water. Ask each builder about post type, hardware and finish.

Do I need a permit for a fence in Encinitas?

A standard back-yard fence within the height limit often doesn’t, but front-yard fences, taller fences, pool barriers and fences on retaining walls can. Parts of Encinitas are in the coastal zone, where extra review may apply. Check with the City of Encinitas building and planning staff before you build.

Find your shortlist in under a minute.

Find my shortlist