Best Electricians in Los Angeles

A short list of electricians serving Los Angeles, picked for track record and clear written quotes.

  • 2 picks
  • License status on every pick
  • Last reviewed: Nov 2026
Electrician in work gloves replacing breakers in an open residential service panel

How we picked

Active CSLB C-10 license

We look up each license on the state board before a pick is marked checked.

Local track record

An established Los Angeles presence and a solid public review history.

Clear written estimates

Itemized quotes that name the permit, and no pressure tactics.

The shortlist

Two Los Angeles electricians, in no paid order. We passed on many listings here that had no real office or website. Each pick shows its license status: “License checked” only appears after we confirm it on the CSLB site.

This Featured spot is open. Paid placements are always labeled and still go through the license check.

1

Powell Electric

5625 Washington Blvd, Los Angeles · (800) 868-0219

License check pending

Troubleshooting, panel and breaker work, rewiring, EV chargers, generators, lighting and pool and spa wiring. Its listed service area runs from the Valley to parts of Orange County.

Google rating 4.7 (4283 reviews), checked Nov 16, 2026

2

The Electric Connection

Los Angeles · (213) 401-2334

License #406002 shown on company site · CSLB check pending

Panel upgrades, whole-house rewires including knob-and-tube and aluminum wiring, EV chargers, generators and lighting. Its site says it has worked in the area since 1979.

Google rating 5.0 (701 reviews), checked Nov 16, 2026

Ratings are shown as they appeared on Google on the date listed. Spot something out of date? Contact us and we’ll re-check it.

What a fair electrical quote in Los Angeles includes

Line itemWhat to expectRed flag
Scope of workEach circuit, fixture or panel change listed, with amperage where it matters“Electrical work as needed” with no details
MaterialsPanel brand, breaker type and wire size written inParts left blank, so cheaper ones can be swapped in
Permit and inspectionPermit and final inspection included, pulled by the contractorTold a panel swap or new circuit doesn’t need a permit
Utility coordinationWho schedules the LADWP disconnect and meter work on a service upgrade, and whenNo mention of LADWP on a panel or service upgrade
Patching and warrantyWall and ceiling patching stated, debris hauled off, written workmanship warrantyDrywall repair left out, or verbal promises only

Cheapest isn’t cheapest

A bid far below the others usually skips something: the permit, the right wire size or the wall patching. Those gaps come back as failed inspections or change orders.

Compare quotes line by line, not just the total.

5 questions to ask before you hire

  1. What’s your CSLB license number, and is it a C-10 Electrical license?
  2. Will the electricians on my job be state-certified?
  3. Will you pull the permit and be there for the inspection?
  4. What exactly is in your written estimate, and what would cost extra?
  5. What warranty do you give on your workmanship?

Check any license yourself

Look up any California contractor’s license, classification, bond and workers’ comp status for free.

CSLB license lookup →

Electrical in Los Angeles: FAQ

How much does an electrician cost in Los Angeles?

It depends on the job: a service call for a dead outlet is a different animal from a panel upgrade or a whole-house rewire. The main drivers are the amperage and panel size, the age of the wiring, how hard the walls and attic are to get into, permit fees, and whether the utility has to be involved. Get two or three itemized written quotes for the same scope and compare them with the table above.

Do electricians need a license in California?

Yes. Electrical work worth $1,000 or more in labor and materials must be done by a contractor licensed by the Contractors State License Board (CSLB), usually under a C-10 Electrical license. The electricians doing the work for that contractor generally must be state-certified too. You can look up any license for free on the CSLB website.

Do I need a permit for a panel upgrade in Los Angeles?

Generally, yes. Panel and service upgrades, new circuits and rewiring usually need an electrical permit and inspection. In the City of Los Angeles, permits go through the Los Angeles Department of Building and Safety (LADBS). Your electrician should pull it; check with LADBS if you’re not sure what your job needs.

Does LADWP have to be involved in a service upgrade?

If you’re in the City of Los Angeles, your power most likely comes from LADWP, and a service or meter upgrade usually means the utility has to disconnect and reconnect power. Ask your electrician who schedules that and how long it typically takes. Homes in neighboring cities may be on Southern California Edison instead, so check your bill.

Find your shortlist in under a minute.

Find my shortlist